High-Fidelity Vintage Vacuum Tube Amplifier with Kt88 Tubes

Product Description

 

Product Description

High-Fidelity Vintage Vacuum Tube Amplifier with KT88 Tubes

Product Parameters

 

 

SNR:	92dB
Harmonic Distortion:	1%(1kHz)
Frequency Machine:	15Hz ~ 30kHz (-1.5dB)
Vaccuum Tube:	12AX7*1, 6SN7*2, KT88*4
Rectifier:	5U4G*1
Demension:	L360mm*W390mm*H225mm

Output reted power: 42+42W (RMS 8OHM) 
Voltage:  ~220V+-5%(50Hz)
Input sensitivity: 210mV;
Input impedance: 100KΩ Output impedance: 4Ω 8Ω
Signal-to-noise ratio: about 92dB Output balance: <0.5db
Net weight: 26kg
Gross weight: 29.8kg
Power consumption: 260W
Power supply voltage: ~ 220V±5% (50Hz)
Working conditions Temperature: 0ºC ~ 40ºC Humidity: 20% ~ 80%
Storage conditions Temperature: -20ºC ~ 70ºC Humidity: 20% ~ 90%

Technical characteristics:

1. Use imported Z11 core pole level isolation cattle and imported EI core high performance broadband output cattle; Using the United States 12AWG single and multi-strand fever wire connection, extreme level isolation cattle effectively alleviate the current impact force, so that low frequency jumping force, control power, more rich image. The materials used in the machine are 100% original imported customized components.
2, special front and rear tube independent double high voltage circuit. Balanced tube life, strong gallbladder flavor,
3, 12AX7 high gain front tube gain factor 100 times, more fresh sound.
4, four KT88 tube rear stage push, high pressure, high power, full sound calm, momentum, delicate open, low frequency unusually strong and powerful, cope with symphony and other large food speakers easily.
5, equipped with BISA current indicator and external BIAS ADJ adjustment function, convenient to monitor the working state and adjust the power tube; Dual function level meter display, pointer with music swing, full of dynamic.
Feature of machine
1, the whole machine adopts large signal and large current building shed small signal circuit board welding
2, using two high quality wide frequency response high sound quality Japanese EI output transformer
3. Use high-power Z11 core ring power transformer specially designed for this machine
4. 12AX7 and 6SN7 vacuum tubes are used for voltage amplification and inverting push, and KT150 vacuum tubes are used for AB1 push-pull power amplification; Super linear working mode, sound open, unrestrained, good momentum, suitable for appreciating big scene, big dynamic and other types of music.6, peripheral power tube current adjustment button and current display head
7, with pure post-stage function, can be connected to the independent pre-stage signal input
8, with balanced input function, can access balanced audio source
9, infrared function remote control
10. Mute delay function (about 30 seconds)
11, to the heat engine can open the mute function, during the mute KT150 vacuum tube only the filament heating high voltage circuit does not work
12. Use Japanese ALPS motor potentiometer
13, easy to install plug - in vacuum tube protective cover.
 

Detailed Photos

 

Company Profile

Founded in 2011, conveniently located in Zhongshan City, Guangdong Province of China, XinWoTong is one of the leading and professional manufacturers of Audio & Video connectors and high-end cables variety and audio associate product in China.

Over the past 6 years, we have specialized in Hi-Fi power plugs, Fever power plugs (US, European and GB standards), Hifi Audio and Video connectors, Banana connectors, Binding posts, Headphone accessories, IEC connectors, Microphone accessories, power sockets, RCA connectors, OEM/ODM services for RCA plugs, Spade terminals, XLR connectors, Waterproof Aviation Connector Plug Socket , and  high-end connection cables.

1. Why choose XWT?

XinWoTong represents a professional manufacturer of industrial connector,  cable assemblies and worldwide custom made solution provider for medical,industrial automation,flight safety, electromechanical actuators markets and about High-end Hifi Series.

2.What kind of certificates does XinWoTong have?
Yes, we owned CE and Rohs.

3.What's information do you need for quoting?
For Cable harness, please advise cable specs, part number, or send drawings.
For Connectors, please kindly advise series, pins, male or female, molded, field assembly or panel mount type and cable length.

4.Can you offer samples, lead time?
Yes, one set of sample is available free charge, about 3 work days lead time.

5. Mass production lead time?
2-3 weeks.

6. What's your payment terms?
For sample production, T/T in advance.
For mass production, 30% T/T, 70% before delivery

7. What's your trade terms?
 EXW,FOB and FCA, can be further disccused.

8.What's Package?
 Customary Packing: PE bag , Carton.  We can also pack it according to your Special request.